Washer Not Draining in Houston, TX
Standing water left in the drum after a cycle is one of the most common washer complaints, and it's almost always a drainage-system issue rather than a problem with the wash cycle itself.
What Usually Causes This
Water sitting at the bottom of the drum after the cycle finishes points specifically to the drain path — the water simply isn't being pumped out — rather than an issue with filling, washing, or agitating.
Common causes
- A clogged drain pump
- A kinked or clogged drain hose
- A small object (coin, sock, wire) lodged in the pump
- A clogged drain filter on models that have one
- A failed drain pump motor
Safe checks you can do first
- Check the drain hose behind the washer for obvious kinks or blockages
- Check whether the washer's drain filter (if accessible on your model) is clogged with lint or debris
- Confirm the drain hose isn't pushed too far into a standpipe, which can create a siphon effect
When Professional Repair Makes Sense
If the hose and filter look clear, the drain pump itself has likely failed or has debris lodged inside it, which is best diagnosed by a technician.
Call (281) 200-7303Washer Not Draining FAQ
Yes — coins, buttons, and small items are a surprisingly common cause of a blocked drain pump.
It's better to address the drainage issue first — running it again risks overflowing or further stressing the drain pump.
Need Washer Repair in Houston?
Schedule residential washer repair with Houstons Best Appliance Repair.